| |
Get
started on your kitchen renovation today! | |
| |
|  |
Because all Quality Doors cabinet doors and drawer fronts are custom made
to your individual specifications, accurate measurements are critical to achieving
the quality results you're looking for. So before you order, measure. Then measure
again. With a few simple tools and a little time you can help insure that your
cabinets have that custom-made look and feel.
Tools you'll need to measure:
tape measure pencil scratch pad order form
Download
order form
here. FAX - Email - or Mail (info at page bottom) |
Remember,
you can mix and match mullion and frame only doors with any of our doors.
Please specify only one wood and finish color per order.  |
| 
This
method allows for a 1/2" overlay of cabinet openings. Make sure there is at least
5/8" clearing around all openings.Instructions are based on using Quality Doors
#900, 900B or 900C hinges.
Measuring
Openings: Always write
the width first. .
Measure
all door openings, including drawer fronts and false fronts, to the nearest 1/8
and write sizes on a scratch pad (F.1 and F.2). To prevent ordering errors, its
best to measure each opening twice.
DOORS AND DRAWER
FRONTS WILL BE CUSTOM - MADE TO THE SIZES YOU SPECIFY.
DO NOT ORDER
BY OPENING SIZES. Figuring
Order Sizes:
Add 1 to
the width and 1 to the height of each opening size. When figuring ORDERNG SIZE
for split door openings (two doors covering the same opening), add 1 to the height;
then add 1 to the width and divide by 2 and subtract 1/1 6. This allows for 1/8
gap between doors. Enter final sizes on order form.
Split Door Example:
36+1=37, 37χ2=181/2, 181/2-1/1 6=187/1 6
ORDER
TWO DOORS TO COVER ANY OPENING MORE THAN 22 WIDE. Ordering:
Use the order form to
enter actual custom sizes you wish to order. 
Mullion
and Frame Only Doors:
Glass not included with Mullion or Frame Only Doors.
On the order form under options, enter(FO) for frame only, enter(ML) for mullions
plus the number of lites (openings). See example below.
|
Quantity |
Design # |
Edge # |
Options |
 | | 6 |
301 |
119 |
ML4 (mullions with 4 lites) 2BR 4BL (2 doors
bore right, 4 doors bore left) | |
2 |
300 |
119 |
FO (frame only) | |
1 |
716HV3 |
191 |
ML6 (mullion with 6 lites) BR (bore right) |
| 1 |
504 |
115 |
ML4 (mullion inserts 4 lites) |
When ordering special designs:(#389,#388,#382),
indicate door design and edge design along with numbers of lites (openings).
Lazy Susan or special edge doors: Indicate requirements under options and
attach a special note on ordering form.
Boring for arched doors (like
door design #301): Indicate under options (BL)bore left (hinge on left),(BR)bore
right (hinge on right), (BP) bore in pairs. See example below. |
|
 |
 |
|
Note:
Skip this step if you have decided to paint your existing cabinet boxes Face frames are the front
frames where cabinet doors and drawer fronts attach. It is not necessary to measure
face frames surrounding cabinet openings. Most professionals order one 2 x 8
sheet of self-adhesive covering (SAC) for every 10 doors (based on an average-size
door of 15 x 25). (Example: for 15 doors order 2 sheets) Order more if you plan
to cover other large areas. Enter SAC-Wo od for real wood veneer or SAC-RTF for
RTF self-adhesive covering under design on order form.
When ordering
a door to cover end panels, indicate 115 square edge in the option portion of
the ordering form.
We suggest cut-to-size plywood to cover end panels
instead of ordering self-adhesive covering (SAC). Order by entering plywood
under design on the ordering form.
Return
the completed Order form to Cab-net.comDouble-check
all measurements. Make sure youve ordered
everything you need, including hinges, trim moulding and decorative accents.
Its a good idea to order a touch-up kit so that you can easily cover up any
little dings that occur in the course of installation or use.
It will take
approximately three to four weeks for your custom order to arrive at your retailer.
| |
 |
| Address | 2002
7 th. Ave SW Largo, Fl 33770 | | |
| Phone | 727.430.5032
- Please call with any questions! | | |
| Fax |
815.572.8109 | | |
| Email | richard@cab-net.com |
| |
| Webmaster | If
you experience any problems with this site please | | visit
richweb.net to contact the web site designer. |
Please contact me with any questions you may
have about saving money on
your new cabinets or cabinet refacing. Your
satisfaction is my goal. 
| | |
